How do I connect my SRM PC8 to WIFI?
Setup wifi connections on PC8 In the Main Menu screen navigate to the Settings menu and then to the Connecfivity menu. Select WIFI to access WIFI options.
How do you use SRM PC8?
To access the PC8 Main Menu press and hold the PRO (Int/Zones) key for 2 seconds. The display will change to the Main Menu screen. Navigate to the desired screen/option by using the MODE (Next) and SET (Select) keys. To return to the previous menu or return to the Ride Screen use the PRO (Exit/Back) key.
How do I turn off SRM PC8?
To put the PC8 manually back into standby mode hold the MODE key for 3 sec. in the Ride Screen. The PC8 display will completely shut off when the charge of battery reaches the lower limit.
How do you wake up a power meter?
Spin the cranks backwards a few times to wake up the power meter. (Note that with some head units, you need to apply a load to the crank and pedal a few times before entering the calibration menu)
What is SRM Power Control Mode?
SRM POWERCONTROL Use the MODE button to scroll through the Real-Time, Average, Maximum, and Time/Date screens. Real-Time displays the current Power, Cadence, Speed, Heart Rate, and Training Zone. The top line will alternate between time, altitude gained, and distance.
Why is my power meter not working?
If the power meters still do not show up in the Stages Power app, it is likely the batteries are dead and need to be replaced. If new batteries do not resolve the issue, remove them again. This time, install the batteries upside down for 1 second, then pull them out and install correctly to reset the power meter.
How do I reset my power meter?
Modified on: Tue, 21 Dec, 2021 at 9:09 AM To perform a hard reset on the Gen 3. Stages indoor power meter (971-0103): Push the hard reset button, located at the end of the power meter housing. Upon hard reset, the power meter will reboot and resume broadcast, and the LED indicator will blink for 10-15 seconds.
How can you tell if your electric meter is faulty?
If the meter stops, turn on 1 appliance at a time and check the meter. If the meter starts to move very quickly, the appliance could be faulty. If the meter is still moving, it’s probably faulty.
What is device agent for SRM pc8 users?
Attention SRM PC8 users… Device Agent V2.1.191 will automatically alert you to new versions of Device Agent and PC8 firmware updates as available. The latest PC8 Firmware features VAM, 30sec Live VAM, 4min Max and Avg Power, Russian language option, Power Zones by Percent of FTP, and more…
Does the SRM pc8 support Ant+™ speed sensors?
NOTICE The SRM PC8 supports ANT+™ speed and combined speed/cadence sensors. A speed sensor must be turned on to be recognized by the PC8.
Where can I find more information about the pc8 deviceagent?
For more information about the PC8 DeviceAgent visit http://www. srm.de/support/manuals-documents/ or Select Help/Manual within the DeviceAgent software. 25 TROUBLESHOOTING My PC8 does not find my ANT+™ device Make sure the sensor you are trying to pair with the PC8 is within range (max 12 feet), and turned on.
How do I update device agent and pc8 firmware?
Device Agent V2.1.191 will automatically alert you to new versions of Device Agent and PC8 firmware updates as available. The latest PC8 Firmware features VAM, 30sec Live VAM, 4min Max and Avg Power, Russian language option, Power Zones by Percent of FTP, and more… Download the new Device Agent, connect PC8, and follow prompts for new firmware.