How do I get my fanimation remote to work?
Turn fan power on, press and hold SET button with a ball-pen or similar object on back of remote for 5 seconds within 60 seconds of powering fan in order to synchronize with fan motor. Step 2 Speed setting: After setting the transmitter learning, press the highest speed setting to set the rotational speed.
What are DIP switches on a ceiling fan?
Ceiling fans have a dip (for “dual in-line package”) switch for setting the frequency. Follow these steps to set or reset the frequency of the ceiling fan. Turn off the circuit breaker that provides power to the ceiling fan.
Are fanimation remotes universal?
These Fanimation controls are almost universal for all Fanimation fans, but be sure to double check as some fans have their own remote designed especially for them. Fanimation controls come in two different colors, white and light almond, as well as several shapes and sizes for the preference of a consumer.
How do you adjust a DIP switch?
How do I move or change a DIP switch? Most DIP switches are very small in size and can be adjusted with a finger or finger nail. However, if you cannot move a DIP switch on a circuit board, use a small tool, such as a small screwdriver or paperclip, to gently adjust the switch.
Why did my ceiling fan suddenly stop working?
This could be because the circuit breaker has tripped or is off. Check your panel to confirm this. If the circuit breaker works fine, it could be a problem with loose wiring and connections. Your ceiling fan could also stop working due to internal defects namely shot ball bearings or an overheated motor.
What is fanSync?
Control your ceiling fans with your smart devices and personal voice assistants. Power to control your ceiling fan with your voice or the swipe of the finger. Developed by Fanimation, fanSync now integrates Bluetooth or Wifi technology into a ceiling fan receiver so you can operate your fan right from your smart device …
Why is it called a DIP switch?
DIP is short for Dual In-Line Package. A DIP switch is a set of electrical switches packaged in a small box or housing. They are designed to be mounted on printed circuit boards to provide a range of electrical inputs to an electronic device based on the position of the individual switches.