How can I connect PTCL router to TP-Link?

How can I connect PTCL router to TP-Link?

How can I connect PTCL router to TP-Link?

Power on your router and computer first and then modem.

  1. Log into the router’s web-based management page.
  2. Configure WAN Connection Type.
  3. Enter your PPPoE username and password which are provided by your ISP.
  4. Click Save to save your settings, then the router will connect to Internet after a while.

How can I configure PTCL router with another router?

How to turn PTCL Router Into a Wi-Fi Repeater/Extender

  1. Reset Router.
  2. Connect Router to your PC/Laptop using LAN.
  3. Open homepage 192.168.1.1 or 192.168.10.1.
  4. Login using Name: admin and Password: admin (if admin doesn’t work, find the password at the bottom of the router)
  5. Click Advanced Settings > LAN.

What is the default IP address of TP-Link Router?

192.168.1.1
The default IP address of TP-Link ADSL router is 192.168. 1.1. Type the username and password in the login page. The default username and password are both admin in lowercase.

How do I turn my modem into a router?

Plug the Ethernet cable you have just disconnected from the computer (or a new Ethernet cable if you are not using a preexisting one) into the back of the wireless router so that it now runs from the LAN modem to the wireless router.

How do I connect my dongle to my WiFi router?

We are listing the general process.

  1. Connect the 3G dongle in USB slot.
  2. Connect the router with LAN wire that you get with the router. Router cable output wire goes as input wire to Laptop.
  3. You can see router configuration page and specify your ISP provider (example: Tata photon)
  4. Enter required fields and set a password.

How do you turn a router into a modem?

How to set the cable modem/router to be on modem only

  1. Access the router interface (routerlogin.com, routerlogin.net, 192.168. 0.1).
  2. Enter the modem router user name and password. The user name is admin. The default password is password.
  3. Proceed to Advance tab and click on Administration then Router Mode.

How can I use two wireless routers without cable?

Go to the router’s Network setup or LAN setup area and look for a section with “DHCP” in its title, and then disable DHCP if it’s on. Connect the bridge router to the main router. If both routers have WPS buttons (most do these days), you can press that button on both routers to connect them wirelessly.

How do I find my TP-Link IP address?

How to find your TP-Link Router’s IP address?

  1. Open Control Panel.
  2. On the top right, choose to view by Category.
  3. Click your network connections.
  4. Click Details in the network status window.
  5. You can find your router’s IP address show as IPv4 Default Gateway.

How do I make my TP-Link a repeater?

How to Configure Repeater Mode on TL-WR702N

  1. Power on the WR702N.
  2. Click OK to exit.
  3. Open a Web Browser -> Type 192.168.0.254 in the address bar -> Press Enter.
  4. Enter the default Password: admin.
  5. Go to Quick Setup-> Click Next.
  6. Select Repeater-> Click Next.
  7. Click Survey.