What is go down wiring?
As its name implies ” Godown wiring “, it is commonly used for light switching in godowns, tunnel-like structures, long passages.. etc, where the light is only required for passage or it requires only at one position at a time.
Where is go down wiring used?
Godown wiring circuit is needed in tunnel like structures, warehouses, long passages, big godowns having lots of rooms and different portions. It was the best choice to save electricity and energy consumption where only one load i.e. light bulb can be operate at a time.
How godown wiring is done?
In godown wiring, the loads are not controlled by a random switching. The user should follow a linear sequence in the switching, from one end to another. That is, to close the circuit for a final load the remaining switches should be ON. That is the load is in series with remaining switches from the beginning end.
What is cleat wiring system?
This type of wiring uses a system of cleats to secure insulated wires in place and lay them out in the electrical grid. The cleats are usually made from wood or porcelain and in two parts that you screw into place. The bottom cleat (the one facing the wall) is grooved to allow space for wiring.
What is the advantage of concealed wiring?
Advantages of concealed conduit wiring system: It has a long life. It is the safest wiring system. Maintenance is easy. No risk of electrical shock, in case of proper earthing and grounding of metallic pipes.
What is staircase wiring?
Staircase wiring or multiway switching or two way light switch wiring is a commonly used connection to control a load from two different positions.That is from above or below the staircase, from by the side of the bed or door, indoor or outdoor.
What is the disadvantage of cleat wiring?
Cleat wiring Disadvantages The system lasts for a shorter period. Sag happens quite often. The system is efficient at low ambient temperature only. Safety is not there as it has the chance of fire or shock at any time.
What are the two major disadvantages of cleat wiring?
Disadvantages of cleat wiring:
- It has a bad appearance.
- It is not looking good.
- This wiring system is not safe and durable.
- It is a chance to shock or fire.
- It is not a sustainable wiring system.
- It is used only low-temperature places.
- Wire are exposed to mechanical injury.
- It is not suitable for domestic premises.
