What are DCC decoder functions?
The DCC decoder has a power circuit that converts the DCC power signal into DC power for the motor and lights. The decoder also has digital logic which uses the power signal information to control the locomotive.
What protocol does DCC use?
The DCC protocol is the subject of two standards published by the NMRA: S-9.1 specifies the electrical standard, and S-9.2 specifies the communications standard. Several recommended practices documents are also available. The DCC protocol defines signal levels and timings on the track.
Is DCC bidirectional?
Bi-Directional Communication protocol for DCC decoder transmission. Commonly known by its Lenz trademark and common marketing name of “RailCom®”. Preamble Series of DCC ‘1’ bits making up the start of a DCC packet.
Can DCC decoders be set to 2 or 4 digits?
DCCWiki, a community DCC encyclopedia. Summary: DCC systems, including decoders, can be set to either 2 or 4 digits addressing. Most modern DCC systems support both.
What is Digital Command Control (DCC)?
DCC (Digital Command Control) is a standard defined by the National Model Railroad Association (NMRA) DCC Working Group and is a standard for manufacturers to allow the independent control of multiple locomotives and accessories on a train set.
What was the source of the DCC signals on this set?
A Hornby Somerset Belle Train Set, which is supplied with a Hornby DCC Select Controller, was used as the source of DCC signals.
What is the range of addresses available on a DCC system?
DCCWiki, a community DCC encyclopedia. Summary: DCC systems, including decoders, can be set to either 2 or 4 digits addressing. Most modern DCC systems support both. The range of addresses available on a Digital Command Control system. This Digital Command Control topic deals with the address range used by Multifunction Decoders.