How much pressure can brass fittings hold?
Brass can accommodate pressures to 3000 psi depending on the design and size of the fitting. However, most brass fitting applications are rated for lower pressures. Brass fitting straights, like steel and stainless steel, are machined from hexagonal bar stock, whereas fitting shapes are typically forged.
What are brass compression fittings used for?
Compression fittings are built from three pieces, creating a mechanical joint connection fitting which is widely used in plumbing systems to join tubing together.
Can you use brass fittings for hydraulics?
Although not one of the most common fittings used in fluid power applications, brass fittings are extremely useful in corrosive environments for both hydraulic and pneumatic hose and tubing applications.
How much heat can a brass fitting take?
Also as a general guide, 1/16″-3/4″ extruded brass pipe fittings may have an intermittent temperature range of -54°C (-65°F) to 121°C (+250°F), however at wide temperature ranges the maximum pressure rating drops significantly.
What material are hydraulic fittings made of?
Importantly, the material used for the hydraulic hose fitting defines its properties. Most common fittings are made of plastic, steel, stainless steel, or brass. Plastic fittings generally are considered more resistant to the corrosion but are weaker and less durable.
Are brass compression fittings reliable?
Although compression fittings are generally considered more reliable than threaded fittings, there are some potential problems. In general, compression fittings are not as resistant to vibration as soldered or welded fittings. Repeated bending may cause the ferrule to lose its grip on the tube.
Should you use PTFE tape on compression fittings?
Can I Use PTFE Tape on Compression Fittings? No. PTFE tape is not designed to seal compression fittings and is ineffective at doing so.
Do you use sealant on compression fittings?
No jointing compound should be used on a compression fitting. The male and female tapered faces should not have anything between them, otherwise the seal is assisted and compromised by foreign and unnecessary material. You need to remove anything which prevents the faces mating.
Do hydraulic fittings need Teflon tape?
You don’t need or should use any teflon tape or pipe dope on hydraulic fittings. Neither are designed for those kinds of pressures and using them could create a less then perfect mating between connection surfaces causing more harm than good.
What temp can brass handle?
Brass: 930°C (1710°F)