What is limited quantity in dangerous goods?
Limited quantity refers to any hazardous goods shipped in small containers and packed in boxes. Transporting dangerous materials in smaller quantities generally means less risk. While there’s a chance regular dangerous goods labels won’t be necessary, the goods still need to be identified with a limited quantity label.
Is limited quantity a hazardous material exception?
above, limited quantity shipments are excepted from the shipping paper requirements of the HMR. This exception includes the requirement to provide the total quantity of hazardous materials covered by a basic description.
What is limited quantity as per IMDG?
Limited quantity specifies the maximum quantity that can be in the inner packaging for transporting these DGs under limited quantity. In the IMDG Code, Look for the dangerous good that needs to be transported and under 7a, it will show the limited quantity for that DG.
What is not needed when shipping dangerous goods as limited quantity?
Per the 49CFR, if you are shipping in Limited Quantities, you are exempt from the following: UN Specification Packaging is not required, but you must use a combination packaging and some general packing requirements apply, for example, it must be a strong packaging capable of withstanding movement during transport.
What are LQ products?
The Limited Quantity Label (or LQ mark) is a diamond shaped symbol that is applied to packages to indicate that the products within the combination packaging are dangerous goods that are packaged in accordance with the Limited Quantity exemption.
What is the limited quantity exception?
The small quantity exception is for use only within the U.S. whereas the limited quantity exception is accepted in international transport. The small quantity exception is for use only in transport by highway or rail whereas the limited quantity exception is available by all modes (highway, rail, air, vessel).
What is limited quantities exemption?
A Limited Quantity Exemption may apply to your shipment if you are shipping small quantities of dangerous goods. This exemption is a simpler regulatory alternative to preparing all DG shipments as fully regulated.
How do you label a limited quantity?
The Limited Quantity label must be applied on at least one side, or one end, of the outer packaging and should ideally be placed in an orientation that shows the mark as a diamond and not a square (flat sides parallel to the sides of the packages).
What is a limited quantity item example?
The limited quantity is the maximum quantity per inner packaging or article for transporting dangerous goods as limited quantities. It can be found in the column 7a of Dangerous Goods List. In the example below, the limited quantity for antimony compounds is 5kg per inner packaging.
What types of items are examples of limited quantity shipments?
Limited Quantities
- Certain shipments of “Cartridges, Small Arms” and “Cartridges, Power Device”
- Certain Division 2.1 and 2.2 gases (2.3 non-pressurized gas samples may also qualify)
- Certain Class 3 materials.
- Certain Division 4.1 PG II and III materials.
- Certain Division 4.2 PG III materials.
What is the limited quantity of dangerous goods?
The limited quantity is the maximum quantity per inner packaging or article for transporting dangerous goods as limited quantities. It can be found in the column 7a of Dangerous Goods List.
What is the stowage category for dangerous goods in limited quantities?
Stowage category for dangerous goods in limited quantities is category A = On or Under Deck. Stowage provisions in column 16a of dangerous goods list is not applicable to dangerous goods in limited quantities. Limited quantities packages must be marked with below mark.
What is the minimum dimension of a dangerous goods container?
The minimum dimension must be 250 mm x 250 mm Container packed with dangerous goods in limited quantities and dangerous goods not in limited quantities must be placarded and marked for dangerous goods not in limited quantities on all four sides.
What are the relaxations under IMDG code for dangerous goods?
Dangerous goods consigned according to chapter 3.4 of IMDG Code has relaxations from many provisions of IMDG Code including marking, labelling, placarding. The biggest relaxation is less stringent requirement of segregation.