How do I set my scanner to destination?

How do I set my scanner to destination?

Registering Scan Destinations

1. Start the Web browser, and access the machine by entering its IP address.
2. Click [One Touch Button] or [Scan Destination].
3. From the [Add New Type] list, select [E-mail], [FTP] or [Folder].
4. Register information as necessary.
5. Enter the administrator password if required.
6. Click [Submit].

How do I setup my Kyocera scanner?

Scan to your PC

1. At the scanner/ copier: Press the “Scanner” button on the left side of the copy machine control panel.
2. Touch “Scan to PC” on the touch-screen.
3. Select your name from the list.
4. Touch “Address Book”
5. Select your computer’s name from the list.
6. Touch “Add Destination.”
7. Touch “Close.”

How do I create a scan to a folder in Windows 7?

To create a share folder in Windows 7, you will need to do the following:

1. Create a new folder on the computers C drive and give the folder a name (Scans).
2. Share the folder using the Sharing and Advanced Sharing buttons.
3. Accessing the Properties of the Folder.
4. Configuring the Folder under “Share…”.

How do I Scan a document into a folder?

Advanced Mode

1. Load your document.
2. Click the Scan tab.
3. Click File.
4. The Scan Settings dialog box appears. You can configure the scan settings in this dialog box. If you want to preview and configure the scanned image, check PreScan box.
5. Click Scan. The image will be saved in the folder you have chosen.

How do I add scan users to kyoceria?

Enter the admin login (Most Kyoceria are Admin/Admin). Go to addess book/machine address book. Perform an Entry for each scan user (see pic below). The email address is not needed. Host – would be the computer name. The port can be anything you would like, just make sure it is open in the computer firewall.

How do I share a kyoceria printer with another computer?

Goto network sharing center and make sure you are on a private network. Then go into Advanced sharing (on the left) turn on print/file share settings Make sure the user on the computer has a pssword. I log into the printer from the IP address. Enter the admin login (Most Kyoceria are Admin/Admin). Go to addess book/machine address book.

How do I change the date and time on a kyoscan?

To change this setting, tap Select or This Device in the Destination window and follow the system prompts. File names start with “kyoScan” and contain the approximate date and time the scan file was produced. How can I provide credentials for printing devices that require additional authentication?