Can you run CLR through an outboard motor?
CLR. Being dubbed the fastest acting of the slow group sounds like a dubious distinction, but this familiar product from Jelmar wasnt that slow, and it did the least damage to aluminum parts for a given amount of calcium removal. On the other hand, it was the safest effective product for descaling an outboard motor.
Can you flush outboard with vinegar?
Vinegar will dissolve some of the corrosion, but it will also leave a surface that is primed for new corrosion to rapidly begin. After use, you would want to neutralize the vinegar with something like baking soda to stop it’s action and then coat the surface with something to slow down the new corrosion.
How do you clean the bottom unit of an outboard motor?
Simple Green Water Spot Remover works great for getting it off. Some say distilled vinegar in a 50/50 solution with water works as well but I haven’t tried that. Spray it down heavily, scrub it, then rinse THOROUGHLY. Then wax the midsection and lower cowling.
How do you remove corrosion from an outboard motor?
A good way to remove internal corrosion form an outboard block is to use the Salt Away. It mixes in with the flush water to remove the salt that has been retained in the motor from running. And for the external corrosion, try Lime Away.
Should you flush your outboard motor after every use?
Most outboard manufacturers recommend a freshwater flush after every use in saltwater to clear the cooling passages of salt residue and scale that can accumulate and impede the flow of vital cooling water through the engine.
How do you remove hard water stains from a boat motor?
Go get one cup of white vinegar, then mix it in two gallons of water. Dip a clean cloth into the solution, and then wipe your boat down. Rinse with warm water afterwards, then squeegee for a thorough clean. Easy peasy!
What will dissolve salt deposits?
With a few basic household materials, however, these salt deposits can be safely and easily removed.
- Combine equal parts of white vinegar and rubbing alcohol in a spray bottle.
- Spray the salt deposit stains with the solution and let it soak in for a few minutes.
- Scrub the stain with a stiff-bristled scrub brush.