How to start class 43?
Starting the Locomotive
- Enter the leading cab.
- Insert the Master Key on the Reverser and then move it to the Engine Off position.
- Move the Train Brake lever to the Full Service position.
- If the Parking Brake is applied, press the button to release it.
How to open the doors on a hst Train sim world?
There are no passenger door control buttons in the cab of the HST as in real life they would be shut manually by the guard/station staff. Therefore the game effectively lets you ‘cheat’ by allowing you to close the doors as the driver.
How do you start the train in Sim world?
To get the locomotive started, set the Battery Isolation Switch to the ‘Closed’ position. To activate the control desk, set the master key into the ‘On’ position. Set the Reverser into the ‘Engine Only’ position. The locomotive is now ready to be started.
How do you unlock doors in TSW?
Simply press the TAB key to call up the menu and select on which side of the train you wish to lock/unlock the doors.
What is PCS on a train?
When the Pneumatic Control Switch (or PCS) is open, the train brakes cannot be released and the throttle controls are deactivated. To operate your train again you must reset the PCS.
What does the mu2a valve do?
On the side of the control stand is the MU-2A valve, that sets up the air rack to receive control signals through the MU system hoses – either to be compatible with Schedule 6 or 26 air brake systems or with older Schedule 24 brake systems.
What is the MU 2A valve?
The MU-2A valve is located on the side of the control stand below the feed valve. It can be either a knob or a lever. In the “Lead or Dead” position, the independent brakes are controlled from this unit. In “Trail” position, the independent brakes are controlled through the mu hoses from another unit.
How do you start the CSX train in train Simulator 2?
Hold the Prime/Start switch to the left position for 5 seconds. This switch is located in the centre right of the engine room. Then move it to the right to start the engine. After the engine has started, close the engine room doors.