Why is my Bearing Buddy leaking grease?
Typically Bearing Buddies are used on boat trailers to keep water out of the hubs. Since boat trailers are not often used in extreme cold weather this may be why we have not heard of thermal issues like this. The most likely cause for the seepage of grease out of your Bearing Buddies is overfilling.
Can you put too much grease in a Bearing Buddy?
Can Bearing Buddy Bearing Protectors Be Over-Filled with Too Much Grease It is possible to over-fill a hub that has a Bearing Buddy bearing protector such as #BB1781.
Do you need to repack bearings with Bearing Buddies?
Expert Reply: When you use the Bearing Buddy Bearing Protectors like # BB2441, so you do not need to take apart the wheel hub and repack the bearings. The Bearing Buddy Protectors have a spring loaded seal that keeps the moisture and debris out of the bearings.
How often should you grease Bearing Buddies?
How often do you grease bearing buddies? How Often Should Trailer Hubs Get Greased with EZ Lube Spindles Standard tapered trailer wheel bearings are recommended to be re-packed with fresh bearing grease about every year or every 12,000 miles under normal use.
Do bearing buddies keep water out?
Bearing buddies DO NOT keep water out, they help. All they do is spring load a supply of pressurized grease into the hub, which aids in keeping water out and pushing grease to the bearings. Bearings will still wear, water will always get in eventually.
How do I know if my Bearing Buddy has enough grease?
This is normal. After driving several miles, check the piston (or blue ring) to see if it has moved inward. If it has, add a little more grease to get the piston to move outward or the blue ring to move about 1/8″ past the front of the Bearing Buddy®.
How do you know when your Bearing Buddy is full?
The air pockets inside the hub cavity and Bearing Buddy® will work their way out past the piston (or blue ring) on the Bearing Buddy®. You should see the piston extend out or the blue ring past the front of the Bearing Buddy® when it’s properly filled.
Can you reuse Bearing Buddies?
They recommend once a year or more if you use it often.
Are Bearing Buddies worth it?
5.0 out of 5 stars I recommend these for every trailer. I would never have a trailer w/o Bearing Buddies. I can’t recommend them enough. They keep the grease packed in the bearings while you are rolling down the road and if you have a boat trailer, when you submerge for launching.
Do you put grease in a dust cap?
If the cap were empty, the grease might eventually work its way into the cap, filling the cap but leaving the bearings dry. That’s why it’s important to not only pack the bearings with grease but to also completely fill the caps with grease.
How often should you change boat trailer wheel bearings?
The axle manufacturers recommend that you repack your trailer bearings once annually or every 12,000 km.