How long can a Worcester Plume KIT be?
Features
| Brand: | Worcester Bosch |
|---|---|
| Length (mm): | 800 |
| Range Type: | Flue Guards |
| Warranty: | 2 Year |
| Weight: | 0.7 kg |
What is a plume management kit?
A plume management kit is a simple device that is attached to your existing flue kit. It is essentially an extension of the flue pipe that is used to release the plume gases out at a more convenient direction and height.
When should a plume management kit be used?
1 states: “Plume management kits shall only be used when provided or specified by the appliance manufacturer. They shall be installed such that the resulting chimney outlet is in accordance with Table C. 2 and Figure C.
What is the maximum length for a Worcester boiler flue?
Note, the terminal end projects beyond the outside wall by the distance shown opposite. Add the following to length (L) to check the maximum flue length is not exceeded: 2000mm for each extra 90° bend. 1000mm for each extra 45° bend.
Can you paint a Worcester flue?
Flue systems must not be modified in any way other than as described in the fitting instructions. Painting of the plume management kit is not permitted.
What is boiler plume?
If you look closer at most UK properties (particularly in the colder weather months when boilers are more likely to be operating), you will likely see what looks like white steam emanating from the property. This steam is the waste gases, commonly known as ‘plume’, leaving the property.
Where should a boiler flue be placed?
The boiler flue terminal should be positioned away from doors, windows or other openings. There should be a space of at least 300mm above, below or to the side of any opening. Harmful gases should be properly expelled from the property, so they cannot re-enter.
How long can a plume kit be?
10m
Flue accessories, such as plume displacement kits and plume deflectors, can be used to point the pluming away from the area that it is likely to cause an issue. At current, a production Baxi, Main or Potterton system or combi boiler with a 60/100mm concentric flue fitted, can be up to a maximum length of 10m.
Why does steam come out of my boiler?
Steam coming from your boiler can indicate one of three things: You Have a Leak in Your Boiler or Pipes. Your Pressure Relief Valve Is Not Working Properly. Your Boiler Is Over Pressurized.
What is a boiler plume?
The flue gases of condensing boilers exhaust at around 55 degrees C, cool quicker in the atmosphere and in certain outside temperatures cause a plume similar in effect to breath on a cold morning.
How high does a boiler flue have to be?
A flue must be at least 2.1m off the ground if it faces a public space. If your property wall backs onto a public space like a pavement, it’s crucial that the flue’s gases don’t endanger people who are walking by. Boiler flues must therefore be placed at least 2.1m off the ground.
What is the Worcester plume management kit?
Pluming can be a real problem in some installations, so rather than having to re-site the boiler the Worcester plume management kit directs the plume to an acceptable exit point away from doors, windows and neighbours. The Condensfit II inner tube is 60mm diameter, with pluming exiting through the outer 100mm tube.
What is a plume kit?
The plume kit fits directly onto the standard worcester flue Meaning you can avoid potentially intrusive areas such as neighbouring properties or doors and windows Helping you to get the job done…
Who can install my boiler and boiler accessories?
All Boilers and Boiler Accessories must be installed by a Qualified Gas Safe Registered professional. Worcester Bosch Plume Management Kits with multi-directional fluing. Connects to Condensfit II telescopic Flue System.
What is included in the boiler flue terminal kit?
Including a flue terminal, two 90 degree pipes, and all the necessary screws, fixings and support brackets, this kit will provide everything necessary for an effective system. Compatible with all Greenstar oil-fired condensing boilers