How much horsepower does a LS2 have stock?
400 hp
Delivered from the factory in the base C6 Corvette, SSR, GTO, or as a crate engine from GM Performance Parts, the LS2 delivers an honest 400 hp and 400 lb-ft of torque.
What are the specs on LS2 engine?
LS Family = Gen. 4, 6.0L, Aluminum Block, Car Engines
| Performance Specifications | |
|---|---|
| Compression Ratio | 10.9 : 1 |
| Horsepower Rating | 390-395 hp. |
| Torque Rating | 400 ft./lbs. |
How much horsepower can I get out of LS2?
The LS2 engine block has a 4.000-inch bore diameter. The cylinders can be bored to 4.030 inches. However, we recommend leaving them as thick as possible when running boost. The block can handle 850 horsepower.
How good is the LS2 motor?
The LS2 also has the convenience of being one of the most adaptable engines, with the ability to fit LS1, LS6, LS3, and L92 cylinder heads. In summary, the LS2 is clearly the better all-around package from the factory.
Is the LS2 a small block?
The LS2 is a Gen. 4, 6.0L, aluminum small block engine.
How many cubic inches is a 6.0 LS2?
364 cu. in.
GM 6.0 Liter V8 Small Block LS2 Engine
| Displacement: | 6.0L / 364 cu. in. |
|---|---|
| Aspiration: | Natural |
| Vehicles: | Corvette C5, Chevrolet SSR, Chevrolet Trailblazer SS, Cadillac CTS-V, Pontiac GTO, Saab 9-7X Aero |
| Introduced: | 2005 model year |
| Discontinued: | 2009 |
How much HP can a stock LS2 crank handle?
Registered. the stock crank can easily handle 800+ hp. There are some using them up to 1000 hp.
Can you put LS3 heads on a LS2?
yep. LS1, LS2, L98, L76, LS9, LS3, LS7 heads all same bolt pattern, same exhaust header bolt pattern and fit the same blocks…
How much horsepower does a 2006 LS2 have?
The LS2 was rated at 400 horsepower at 6000 RPM, while rated torque is 400 lb-ft at 4400 RPM. While the torque number matches peak torque from the LS2, it is reached 400 RPM lower, which certainly improves the feel of the engine.
What is the difference between a LS1 and LS2 engine?
The main difference between the engines in the LS family is the displacement, intake, camshaft, and various small details. The LS1 and the LS2 have a lot in common. But, the most obvious difference between the two is the displacement. The LS1 has a displacement of 5.7L, whilst the LS2 has a displacement of 6.0L.
What is the actual horsepower of a corvette LS2 engine?
The LS2 also featured an increase in cylinder bore dimensions from 3.90 inches to 4.00 inches. This initial Gen IV small-block was capable of producing 400 horsepower at 6,000 RPM, and churning out an impressive 400 lb./ft. of torque at 4,400 RPM.
Is a LS2 a small block chevy engine?
This LS2 engine is based on the LS1 block, which has a 6 bolt main, structural oil pan and a deep skirt. New additions to the LS2 are as folows: Knock sensors were relocated. The crankcase vent was moved to the top of the valley. The cam sensor was moved to the front of the LS2 engine. LS2 heads flow very well and are actually from the LS6 engine.
How much horsepower does a LS2 have?
Upon deactivation, lifters within the dead cylinders were allowed to compress, making rotational camshaft function possible, without valve actuation on affected cylinders. LS2 engines utilizing this technology carried RPO code “L76”. LS2 Engine Specifications. Horsepower: 400 hp @ 6,000 rpm (298 kW) Torque: 400 lb./ft. @ 4,400 rpm (542 N.m)