How do I reset my AirTies?
See also Extending your AirTies mesh network with an additional device….To reset a device to factory default:
- Use the end of a metal paper clip, plastic toothpick, or similar.
- Push this pointy object down the hole marked “RESET” on the back of the access point and hold it for 5 seconds.
How do I reset my AirTies 4920 password?
Type “http://air4920.local” in the address bar (or “http://air4930.local” if this is the model you have). Log in (the default password is blank) and navigate to “Quick Setup” in the menu on the left-hand side. Follow the onscreen instructions to change your wireless network name (SSID) and password.
How do I log into my Airties router?
Sometimes you need your router web interface IP address to change security settings. Most people don’t know their router IP address….Default login IPs for my AirTies router.
| # | Default Router IP |
|---|---|
| 1 | 192.168.2.1 |
| 2 | 192.168.2.254 |
| 3 | 192.168.2.154 |
How do I connect AirTies to the Internet?
EASY SETUP: ACCESS POINT
- Position one Air 4920 next to your router and connect the two using the enclosed Ethernet.
- Connect the Air 4920 device to the mains and press the power switch.
- Wait until both 5 GHz and 2.4 GHz LEDs are solid green This may take up to 3 minutes.
How do I find my AirTies IP address?
Sometimes you need your router web interface IP address to change security settings….Default login IPs for my AirTies router.
| # | Default Router IP |
|---|---|
| 1 | 192.168.2.1 |
| 2 | 192.168.2.254 |
| 3 | 192.168.2.154 |
Why do AirTies blink green?
The wireless network is inactive or affected by temporary interference. WPS connection succeeded. This status is temporary and lasts for about 5 seconds, before it changes to one of the following: Green light, strong-signal mesh: no action required.
Why is my Wi-Fi extender blinking red and green?
Be sure you’re not connecting through a 3rd party router. Make sure there aren’t any smart devices connected by Ethernet to your extender….AirTies 4920.
| LED color | State | Meaning |
|---|---|---|
| Green/Red | Flash | Connected but too far from your Wi-Fi gateway. Depending on your BB service speed move your Wi-Fi extender closer to your gateway. |
How do I log into my AirTies router?
AirTies Router Login Guide You should see 2 text fields where you can enter a username and a password. The default username for your AirTies router is n/a. The default password is (blank). Enter the username & password, hit “Enter” and now you should see the control panel of your router.
How do I connect the set-top box to the air 4920?
(Optional) Now, you can connect wired devices (in this example, the Set-Top Box) to the Air 4920 using the ethernet cable (yellow plug). 5. (Optional) You can add additional Air 4920s to your network by repeating steps from 1. If you would like to improve wireless coverage in another room, you can set up an additional Air 4920.
Why work with Airties?
“Working with Airties has helped us create an amazing new customer experience across screens with Fluid Viewing, as well as take the Sky experience to the next level.” “The total user experience provided by our team and Airties is outstanding.
How do I reset the equipment to factory settings?
Even if the equipment starts up automatically, it will be several minutes before all systems come back online and allow you to enjoy your Internet-based services. To return unit to factory settings, press down on the reset button (in a small opening on the back) for 10 seconds.
Why choose Airties for whole home Wi-Fi?
“With Airties, we can deliver whole-home Wi-Fi in a scalable and cost-effective way that maximizes performance.” “Working with Airties has helped us create an amazing new customer experience across screens with Fluid Viewing, as well as take the Sky experience to the next level.”