Can you use RedGard for shower pan?
The RedGard Roll On Waterproof Shower Pan Liner Kit is another option in waterproofing and building your tile shower the right way from the bottom up.
Can you tile directly over redguard?
Can You Tile Directly Onto RedGard? There’s no need to put another layer of product on top of RedGard before you begin tiling. A surface that has been painted with RedGard and allowed to dry is ready for you to apply thinset and install tile. You can install thinset mortar and tile directly onto RedGard.
Is redguard good for shower walls?
Applying RedGard to any surface is super easy. If you can paint a wall you can use RedGard no problem. And for this shower, we only needed one gallon.
How much red guard do I need for a shower?
Apply RedGard at a rate or 110 sq ft per gallon each coat. If using a trowel, spread the material with the trowel held at a 45° angle, and then flattens the ridges. If using a roller, apply a continuous, even film with overlapping strokes.
Is RedGard a vapor barrier?
It bonds directly to clean metal drains, PVC, stainless steel, and ABS drain assemblies and can be used as a slab-on-grade moisture vapor barrier under all types of floor coverings.
What kind of thinset do I use over redguard?
The Flexbond modified thinset, which is sold at HD, lists redgard as one of the surfaces it can be applied to and therefore, following manufacturer recommendations, a person should be using a modified thinset like Flexbond over Redgard.
How long does RedGard take to cure?
The product is dry when it turns solid red with no pink showing, normally 1-1/2 to 2 hours. Depending on ambient conditions, drying time can take up to 12 hours. A water test can be conducted 72 hours after application if required.
Can you put RedGard over Greenboard?
Put the green board up, coat it with redgard, stick on your tiles. The water will just wick to the other areas not covered in redgard or get behind the green board and leak somewhere else. You will be doing versions of the same thing over and over, you will have mold issues, tiles will fall off.
Can redguard be too thick?
Periodically check the film thickness with a wet-film gauge. Combined dried coatings must be at least 30-35 mils thick. When wet, the combined coatings must be at least 60-70 mils and must not exceed 125 mils wet-film thickness. RedGard® is dry when it turns solid red, with no visible pink color.
Can you use redgard as a shower pan?
You can apply RedGard to concrete, cement backerboard, exterior grade plywood and exterior decks. It also bonds directly to metal and plastic drain assemblies. RedGard is tough enough to be used as a shower pan liner. Before installing RedGard, make sure any exterior or wet areas have properly angled floors that slope to drains.
How to red Gard shower walls and Pan Red Guard?
JPM. I am deciding how to do my shower liner …
Is Red Guard a vapor barrier?
It creates a waterproof membrane barrier and reduces crack transmission for use on both interior and exterior substrates. It bonds directly to clean metal drains, PVC, stainless steel, and ABS drain assemblies. It can be used as a slab-on-grade moisture vapor barrier under all types of floor coverings.
Is Redguard waterproof?
Redguard, a product of Custom Building Products, is an elastomeric membrane product used under tile and stone applications as a waterproof barrier. Both products are popular for creating secondary and primary waterproof barriers in commercial and residential installations. Both products are proven technologies.