How do you reset a Plantronics headset?
How to Reset a Plantronics Bluetooth
- Turn on the headset by pressing the “Power/Answer” call button.
- Hold down the “Power” button and the “Lower Volume” button (minus button) together until the light goes out.
- Wait for one minute for the reset to be complete.
- Turn on the headset again by pressing the “Power” button.
Why is my Bluetooth headphones not pairing?
For Android phones, go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile & Bluetooth. For iOS and iPadOS device, you’ll have to unpair all of your devices (go to Setting > Bluetooth, select the info icon and choose Forget This Device for each device) then restart your phone or tablet.
Why is my device not pairing?
If your Bluetooth devices won’t connect, it’s likely because the devices are out of range, or aren’t in pairing mode. If you’re having persistent Bluetooth connection problems, try resetting your devices, or having your phone or tablet “forget” the connection.
How do I pair the CS60 headset with the base?
PLANTRONICS CS60 – PAIRING Instructions. in order to pair the headset with base follow the instructions below: Both the headset and base need to be in pairing mode simultaneously in order for the units to ‘find’ each other.
How do I Sync my Plantronics CS60 with the base unit?
How to sync your Plantronics CS60 headset with base unit: 1. Return the headset to the charging base. 2. Press and hold both the + and – buttons on the back of the charging base until the red light on the front of the base starts to flash. 3. Let go of both buttons. The red light should continue to flash.
How do I connect my phone handset to my CS headset system?
Unplug the coiled receiver cord from your phone base (detach the handset from the jack at the base end of your phone). Plug the flat black connector cord that is already plugged into your Plantronics CS Headset System base into the jack where you just unplugged your telephone handset.
How do I connect the hl10 to my CS headset system?
Then plug the wire on the HL10 into the remaining slot on the bottom of your Plantronics CS Headset System base. The master control for this is the A-B-C-D switch located on the underside of the wireless system. A is the quietest, D is the loudest.