How do you start a car with a security light on?
If nothing happens or the engine starts and dies, the security light will be flashing. Leave the key in the On position and wait ten minutes. The flashing light should go off or illuminate without flashing. When it does, turn the ignition off, wait twenty seconds, and then try to start the engine.
What causes the security light to come on?
In short, an illuminated security light means that your car doesn’t trust the key you’re using to start the car. In theory, the immobilizer security system could be triggered by an attempted theft, but it’s more commonly a result of a battery problem.
Why is my car’s security light blinking?
That’s the Security Indicator Light, and it’s blinking, it’s telling you that the car’s security sytem is armed. When the car is locked and off, the Security Indicator Light will blink steadily. It will trigger shortly after the engine has been turned off and the key has been removed from the ignition.
How do I bypass GM anti-theft?
How do I disable GM anti-theft system?
- Leave the ignition key turned to the “On” position after the vehicle has stalled and will not start.
- Look at the dashboard and locate the theft system light.
- Turn the ignition to the “Off” position to disable the PassLock system, and wait for 20 seconds for the system to reset.
How do I get my car out of theft mode?
Look for a button that allows you to slide the physical key out of the fob. Step 2: Turn the vehicle key to unlock the car door without releasing it. Hold the key for 30 seconds in this position. This will signal to your car’s system that you have the right key, and will enable you to bypass your car’s alarm system.
Can anti-theft make your car not start?
If the security or anti-theft light is flashing when you attempt to start your car, and the engine does not crank or does not start, you have an anti-theft problem. The system may not be recognizing your key or keyless entry signal, or there may be a fault in the anti-theft module, keyless entry system or wiring.
Will a bad battery cause security light to come on?
Hello. On your particular vehicle the security light staying on as the vehicle is running is an indication that the security system has failed and is disabled. It is common for a security light to come on after battery dies because the computer may lose its programming to the key.
How do I get the security light off my car?
Step 1: Insert the key into the door lock. Use the side door on the driver’s side and the physical key even if there is a keyless entry system on the car. Step 2: Turn the vehicle key to unlock the car door without releasing it. Hold the key for 30 seconds in the position.
How do I turn off my car security light?
Insert your car key into the ignition and turn it on just so that the accessories activate, but not the engine. Step 3: Do a secondary check on the anti-theft light. If it is no longer blinking, turn the key to the “off” position and let your car sit for a couple of minutes.
Why is my theft system light blinking?
The Anti-theft Light in the dash of your car should flash periodically to show that the system is engaged and active. You have to lock the doors of the car (without it running) for the alarm to engage.
What are some common problems with the Oldsmobile Alero?
One of the most common problems associated with the Oldsmobile Alero is a malfunctioning vehicle security system. Now discontinued, the Oldsmobile Alero was manufactured between 1999 and 2004. It included the “GM Passlock System,” which is meant to prevent the vehicle from being stolen. When activated, the system prevents the vehicle from starting.
What is the Oldsmobile Alero PassLock system?
Now discontinued, the Oldsmobile Alero was manufactured between 1999 and 2004. It included the “GM Passlock System,” which is meant to prevent the vehicle from being stolen.
How do I fix the security light on my Toyota Corolla?
Turn the ignition to the “OFF” position after the “security” light stops flashing or goes off completely. Wait 20 seconds and start the engine again. If the engine successfully starts, you have fixed the security problem. If not, you must perform a security system “relearn” procedure. Perform the 30-minute security system “relearn” procedure.
How do you turn off the security light on a Ford Explorer?
Rotate the key to the “On” position. Leave the key in that position for 10 minutes. Rotate the key to the “Off” position when the security warning light on the instrument panel disappears. This usually takes 10 to 12 minutes with key in the “On” position.