How long does flood CWF-UV last?
A: Hi Heather, this product can be used on wood playgrounds to stain and seal. With proper preparation and application, this product is guaranteed to last for 2 years on decks and 4 years on fences and siding.
How long does CWF last?
Specifications
| Available Sizes: | 1 Gallon/3.78 L , 5 Gallons/18.9 L |
|---|---|
| Coverage: | 150-250 sq ft/gal | 13.9 – 23.2 sq m/3.78L Coverage will vary depending on the type, age and texture of the wood. |
| Dry Time: | 24 – 48 hours, depending on tempature and humidity |
| VOC: | Does not exceed 275 g/L |
Is flood a good fence stain?
Overall Score Flood CWF Oil at 2 Year Period: 7.0 – The Flood CWF-UV 5 OIL is a decent stain. Better than most acrylic-based stains as this semi-transparent oil-based stain penetrates well into the wood grain. Little disappointing on the color retention and mold.
How long does flood oil last?
Flood CWF-UV lasts for at least 6 years without the need for a recoat.
Is flood CWF oil or water based?
Manufacturer Description: Flood CWF-UV5 is a premium oil-based wood finish that protects and beautifies exterior wood.
Who makes CWF?
CWF-UV, E-B Emulsa Bond, Floetrol, Flood, Penetrol and Wood Pride are registered trademarks of the PPG Group of Companies.
What is the difference between CWF UV and CWF UV5?
CWF-UV®5 is a higher-performing CWF-UV® finish that offers more protection from sun and water damage.
How long does it take for flood stain to dry?
It protects by penetrating the wood surface. For porous or older wood, if required, apply a second coat before the first coat has dried (within 20 minutes). Allow the finish to dry for 24 to 48 hours.
What is the difference between CWF-UV and CWF UV5?
Can Flood CWF be tinted?
CWF-UV can be tinted to 3 wood tones — Cedar, Redwood and Honey Gold. Recommended for use on any properly prepared exterior wood, including decks, fences, siding, railings, outdoor furniture, and other wood surfaces.
Is flood stain oil based?
Can I paint over CWF?
Cover everything you do not wish to coat, including plants. Make sure the wood surface has been properly prepared and is completely dry. Do not mix with any other coating, paint or stain products, and do not thin the product. Stir the product before and periodically during application.