Does flywheel weight affect horsepower?
Yes. It won’t wind up or decelerate nearly as quick with the extra weight. The extra weight will store more energy during the power stroke and dissipate it during the other 3 cycles. You lose HP and gain torque.
Does a lighter flywheel improve acceleration?
You effectively “lighten” a car by more than 10% in first gear just by removing mass from the flywheel. As the gear used increases this “lightening” effect is reduced. This is why car’s acceleration improvement reduces in higher gears, to very effect in top gear.
How much does a stock flywheel weight?
A stock 90/91 flywheel weighs in at 21 lbs (20.90 to be exact, but this one probably has been resurfaced).
How much difference does a lighter flywheel make?
“We average anywhere from 40 percent to 60 percent lighter than OEM,” Jenkins said. “It does vary per application, depending on whether you’re coming from an OEM single-mass or an OEM dual-mass flywheel.” With a lightweight flywheel, right away you will notice the engine revs more quickly.
Is a heavy or light flywheel better?
The heavy flywheel helps RPM recovery, allows the engine not to lug during the gear transmission. The light flywheels decrease the inertia, so it gives a quick response to acceleration and deceleration.
What are the benefits of a lightened flywheel?
With a lightweight flywheel, right away you will notice the engine revs more quickly. You free up the horsepower your engine is already making and send it to the rear wheels rather than have it dissipate as parasitic losses.
How much does a motorcycle flywheel weigh?
A flywheel weight is a 9, 11, 13 oz weight that bolts to ur flywheel behind the ignition cover. It helps the engine not stall as easily and it revs slower, making it easier for trails.
What pound flywheel do I need?
Many people consider 40 LB to be ideal, but anything over 20+ pounds is going to be heavy enough to generate a good amount of momentum. Most high-quality cycle bikes on the market with a smooth feel will incorporate a heavy flywheel system since these bikes are much easier to manufacture.
What are the advantages of a lightened flywheel?
A lighter flywheel takes strain off the engine and allows the engine to rev more freely, as a bonus there is less weight to move so the engine is able to use more of the available power to propel the vehicle. A lighter flywheel will enable engine revs to increases and decreases more quickly.
What is the difference between a 2JZ-GE and a 2JZ-GTE?
The engine block, crankshaft, and connecting rods of the 2JZ-GE and 2JZ-GTE are basically the same, but the 2JZ-GTE has recessed piston tops for a lower compression ratio. The 2JZ-GTE has an oil spray nozzles to aid in cooling the pistons and a different head with redesigned intake and exhaust ports, cams, and valves.
What is the horsepower of a 2JZ-GTE engine?
The first generation of the 2JZ-GTE engine produced 280 PS (206 kW; 276 HP) at 5,600 rpm of maximum horsepower and 432 Nm (44.0 kg·m; 318.8 ft·lb) at 3,600 rpm peak torque. For export North American and European markets, this engine was equipped with other CT12B turbochargers, revised camshafts,…
What is the bore and stroke of a 2JZ-GE?
Bore and stroke are 86.0 mm (3.39 in) and 86.0 mm (3.39 in), respectively. Compression ratio rating is 8.5:1. The engine block, crankshaft, and connecting rods of the 2JZ-GE and 2JZ-GTE are basically the same, but the 2JZ-GTE has recessed piston tops for a lower compression ratio.
What kind of fuel injection system does Toyota 2JZ GTE have?
The 2JZ-GTE is equipped with multiport sequential fuel injection system, VVT-i (Variable Valve Timing with intelligence) since 1997 and twin-turbocharge with intercooler. Bore and stroke are 86.0 mm (3.39 in) and 86.0 mm (3.39 in), respectively.