How do I change the default gateway on a SonicWall?

How do I change the default gateway on a SonicWall?

How do I change the default gateway on a SonicWall?

  1. On the SonicWall, navigate to DEVICE|Diagnostics. Choose Ping.
  2. Ping your ISP’s Default Gateway or any IP that is pingable on the Internet ( EXAMPLE: 4.2. 2.2).
  3. Also try to ping a website ( www.google.com) to ensure that the DNS resolution is working.

What is the default IP for SonicWall?

SonicWall Default IP Address: 192.168. 1.254. Administration Credentials: admin | password.

How do I connect directly to SonicWall?

Connect a computer directly to the SonicWall device LAN Port.

  1. Use the Cross-Over cable to connect a windows computer directly to the LAN port of the SonicWall.
  2. Run the SetupTool to discover the SonicWall’s IP address.

How do I change the interface on my SonicWall?

To configure a physical interface on SonicWALL with a static IP Mode:

  1. Navigate to MANAGE | Network | Interfaces.
  2. In the Interface Settings table, click the Edit icon for the interface you want to configure.
  3. Select a zone to assign to the interface from Zone – LAN, WAN, DMZ, WLAN or any Custom zone you’ve created.

How do I change ISP on SonicWall?

Once you are logged into SonicWall , please click Network option on the top bar and then please navigate to System| Interfaces . Click Configure for the WAN interface (X1 by default.), the Edit Interface window is displayed. Under IP address, choose Static from the drop down menu.

How do I access my SonicWall router settings?

Open a browser to https://192.168.168.168 for access to the SonicWall. For the first time access as the Admin user, you will be offered a choice to use a Setup Wizard or go directly to the SonicWall management interface. At the SonicWall management login page the default Admin username and password is: admin/password.

What is the console port on a SonicWall?

The console port on the SonicWall appliance is used to access the SonicOS command line interface (CLI) via the DB-9 to RJ-45 cable.

How do I connect my SonicWall to my router?

Connect your Internet modem/router to the WAN port on the SonicWALL appliance, using an Ethernet cable. An activated WAN light indicates that a connection is present.

How do I change my public IP on SonicWall?

Add an Access rule configuration.

  1. Navigate to the Policies | Access Rules page.
  2. Select the LAN to WAN to enter the Access Rules (WAN > LAN) page.
  3. Click on the marked arrow to open the Add Rule window.
  4. Select Allow as the Action.
  5. Select Any as the Service.
  6. Select Source as Any.
  7. Select StandbyStatic IP as the Destination.

How do I make SonicWall my default WAN?

Resolution for SonicOS 6.2 and Below

  1. Login to the firewall.
  2. Navigate to Network | Failover & LB.
  3. Ensure that Enable Load Balancing has been enabled.
  4. Navigate to groups and on edit the Default LB Group.
  5. Select X2 under Selected Interface Ordering and using the arrow keys move the X2 on top.
  6. Click OK at the bottom.

What is the default IP address of SonicWall CDP?

SonicWALL CONTINUOUS DATA PROTECTION ( CDP) APPLIANCES. admin. password. 192.168.168.169. SonicWALL SonicPoint appliance. admin. password. 192.168.1.20. SonicWALL Default IP Addresses.

How to configure WAN interface in SonicWall?

Once you are logged into SonicWall , please click Network option on the top bar and then please navigate to System| Interfaces . Click Configure for the WAN interface (X1 by default.), the Edit Interface window is displayed.

What information do I need to set up my SonicWall appliances?

Default IP Address and Administrator (admin) Username and Password for all SonicWALL Appliances 1 SMB SSL-VPN 2 EX Series SSL-VPN 3 EMAIL SECURITY