How do I reset my ProCurve switch to factory settings?

How do I reset my ProCurve switch to factory settings?

How do I reset my ProCurve switch to factory settings?

To execute the factory default reset on the switch, perform these steps:

  1. Using pointed objects, simultaneously press both the Reset and Clear buttons on the front of the switch.
  2. Continue to press the Clear button while releasing the Reset button.
  3. When the Self Test LED begins to blink, release the Clear button.

How do I reset my HP ProCurve 5406zl?

When resetting a Switch 5412zl, 5406zl, 3500yl-24G, or 3500yl-48G to factory default settings, the “Clear” button must be depressed for approximately 25 seconds. For all other switches, the Clear Button is held for no more than 5 seconds. Release the Clear button.

How do you reset a ProCurve 1800 24g?

How do I reset factory defaults on the ProCurve 1800 Series Switches?

  1. Remove the power cord from the back of the switch.
  2. Connect port 1 to port 2 on the front panel, using a standard network cable.
  3. Reconnect the power cord to the rear of the switch.
  4. Wait at least 40 seconds before disconnecting port 1 from port 2.

How do I reset my HP ProCurve 1800 24g?

Solution

  1. Remove the power cord from the back of the switch.
  2. Connect port 1 to port 2 on the front panel, using a standard network cable.
  3. Reconnect the power cord to the rear of the switch.
  4. Wait at least 40 seconds before disconnecting port 1 from port 2.

How do I reset my HP 1820 switch?

To execute the factory default reset on the switch, perform these steps:

  1. Using a small, thin tool with blunt ends (such as a paper clip), press the Reset button on the front of the switch.
  2. Continue to press the Reset button until the Fault LED light begins to flash.
  3. Release the Reset button.

How do I power off my HP ProCurve 1700/1800 switch?

Power off your HP procurve 1700/1800 switch by pulling the power adapter plug from the back of the unit. Plug one end of the ethernet cable into port one on the switch and the other end of the ethernet cable into port two on the switch.

What is the model number for ProCurve switch 1700-8?

ProCurve Switch 1700-8 (J9079A) ProCurve Switch 1700-24 (J9080A) Disclaimer HEWLETT-PACKARD COMPANY MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

How do I update my ProCurve Switch software?

Updates the switch software using a file provided by ProCurve Networking. Click on the “Browse” button to select the software file. Press the APPLY button to update the selected switch software file. You can download software files for your switch from the support section of the ProCurve Networking Web site at www.procurve.com.

How to identify the switch system in ProCurve?

Using the ProCurve Web Browser Interface Displaying the System Name You can easily identify the system by displaying the device name, location, and contact information. Field Attributes †System Name– A name assigned to the switch system. †System Location– Description of the switch location. †System Contact– The contact name for the switch.