How long does it take to install a FASS fuel system?
First, I was impressed with the unit itself. The quality and completeness of the kit is very good along with the stock filter delete mod. The whole installation took about 4 hours altogether and I am really picky on how everything is routed and located.
How does Fass fuel system work?
The FASS Extreme Water Separator utilizes a state-of-the-art water trap technology which traps water inside of the filter element while allowing diesel fuel to pass through.
How long do Fass fuel filters last?
All vehicles should come with a maintenance guide telling owners when certain parts should be replaced. And while most diesel fuel filters should be replaced every 10,000 to 25,000 miles, it could vary depending on how frequently the vehicle is used and how well it’s maintained.
What does a Fass fuel system do?
FASS stands for Fuel Air Separation System and is a combination diesel fuel lift pump and fuel filtration system that is designed to improve your diesel truck’s fuel mileage, engine performance and extend the life of your diesel injection system.
Does a FASS add power?
Hardest parts are getting the fuel line off the tank, and drilling the holes for the bracket. After that, its all down hill. As for the power increase, we have seen anywhere from 10-20 HP gain with the FASS on dyno runs after a full days worth of driving.
How long do FASS fuel filters last?
What to do if you install the wrong Fass fuel system?
Installing the improper FASS Fuel System or installation kit can cause severe engine damage. This installation manual applies to the FASS-150-DO-98-04 contained in the same package. The serial number on the installation/owners manual package should match the serial number on the outside of the box. If it doesn’t, call the factory.
Where can I find the installation manual for the FASS system?
INSTALLATION MANUAL Welcome to the FASS Fuel/Air Separation System. A full color installation manual is available at our website www. dieselpp. com. The installation of the FASS FUEL SYSTEM can be relatively simple when the following steps are followed. 1. Inventory the package components completely. Notify Diesel Performance Products, Inc.
How do you install the FASS fuel line on a Ford Explorer?
Route fuel line from the suction port of the fuel tank to the port of the FASS System labeled with the letter “T”. Cut and attach to the push lock fitting. Remember to oil the fitting and fuel line before connecting.
How do you put a flare on a Ford FASS system?
Route the fuel line from the “T” assembly in the overflow tube to the port on the FASS System labeled with the letter “R”. Cut fuel line and insert the 3/8” x 1/2″ (push lock x female flare) fitting. Remember to oil the fitting and fuel line.