How many quarts of oil does a Shovelhead take?
How Many Quarts Of Oil Does A Shovelhead Take? For all shovelheads manufactured between 1966 and 1984, Harley-Davidson recommends 4 quarts of SAE 50 or 60 engine oil.
What size is the drain plug in Harley transmission?
M18x1. 5×12 Magnetic Drain Plug for Harley Davidson Harley Davidson’s Porsche-designed V Rod engines require only one drain plug – for the engine oil, transmission oil, and for the primary chain case. This drain plug works for all three and is equipped with a 1/2″ diameter high-temperature magnet.
How often should you change transmission fluid in a Harley?
How often should I change the tranny oil in my Harley? According to the manufacturer’s service manual, you should change the engine oil at 5,000 miles. Primary oil should change at 10,000 miles, and trans fluid at 20,000 miles. A transmission oil change should happen every year.
Can I use gear oil in my Harley transmission?
Our answer: It is perfectly acceptable to use 75W-140 gear oil in Harley-Davidson transmissions.
What oil goes in a Harley transmission?
What Oil Goes In A Harley Transmission? According to AMSOIL, the 20W-50 Synthetic V-Twin Motorcycle Oil is recommended for use in the engine, transmission, and primary chaincase of most Harleys (see our Motorcycle Product Guide for more information).
How much transmission fluid does my Harley take?
approximately 24 ounces
The transmission fluid capacity is approximately 24 ounces (0.71 liters).
How do you drain Shovelhead oil?
Loosen the oil drain plug, located at the bottom rear corner of the oil tank, using a socket wrench. Hold a funnel below the oil drain plug, placing the end of the funnel into a 1-gallon plastic jug. Unscrew the oil drain plug by hand and allow the oil tank to empty.
What oil should I run in my Shovelhead?
Recommended Fluids Harley-Davidson recommends 4 quarts of SAE 50 or 60 engine oil in all 1966 through 1984 shovelheads. The transmission uses 1.5 pints of HD transmission lubricant, although many people use 75w90 gear oil mixed 3-to-1 with Lucas oil. Harley-Davidson makes two types of fork oil for shovelheads.
What size is Harley drain plug O ring?
They are a standard 7/16″ (ID)O ring.
What kind of fluid goes in a Harley transmission?
Answer: For any Harley Twin-Cam engine, we highly recommend using AMSOIL Synthetic 20W-50 in “all three holes” (as they put it) for two essential reasons. Update: AMSOIL now offers dedicated fluid for Harley Davidson primary chain-cases and transmissions.
When did the Shovelhead motorcycle engine come out?
Originally manufactured as 1200 cubic centimeters (cc), the engine was increased to 1340cc in 1979. Although the shovelhead was replaced by the evolution engine in 1985, most of the shovelheads that were made are still on the road in the United States and Japan. Motorcycles need their main fluids changed at regular intervals.
What kind of oil does a 1966 Harley Davidson shovelhead take?
Harley-Davidson recommends 4 quarts of SAE 50 or 60 engine oil in all 1966 through 1984 shovelheads. The transmission uses 1.5 pints of HD transmission lubricant, although many people use 75w90 gear oil mixed 3-to-1 with Lucas oil.
How much oil does the front fork of a Shovelhead hold?
The front fork oil capacity varied over the 18 years the shovelhead was in production. Instructions for new front forks include the amount of oil required. Models from 1966 to 1969 use 6.5 oz. of fork oil.
How often should I change the oil in my Shovelhead?
The official maintenance recommendation is to change engine oil every 5,000 miles, but changing the oil at 2,500 miles is a good idea for an older shovelhead. The primary lubricant should be changed at 5,000-mile intervals, the transmission oil every 10,000 miles and the the fork oil every 20,000 miles.