What is 12V trigger on AV Receiver?
The 12 Volt Trigger is a powerful feature that comes equipped on all MSB powerbases and amplifiers. This simple 3.5mm mini-jack connection allows you to create a simple network between all of your MSB powerbases and amplifiers for a more seamless power up and standby experience.
What is 12V trigger in amplifier?
This switch is used to enable or disable the 12 volt trigger sensing circuitry on the amplifier. If the switch is set to the ON position, the power amplifier will remain in standby mode until it detects a 12 volt signal at the 12V Trigger Input on the back panel.
How long can a 12V trigger cable be?
Features. Pure Theatre 12v Trigger Cable is 10m in length and delivers a powerful and high-performing experience between the possible connections.
What is receiver trigger?
What Is a Trigger? A trigger is a device that facilitates simultaneously powering on and off multiple components within a larger stereo or home theater system. For example, use a trigger to automatically turn on a projector, receiver, amplifier, AV processor, TV speakers, and more when you activate a single device.
What does the 12V trigger do on the port?
A 12V trigger output is power limited and used strictly for control. PORT will accept line level audio input. By this I mean a Tuner, Cassette Deck, CD player, etc., not direct magnetic Phono cartridge output. A magnetic Phono Cartridge would need some sort of pre-amp to bring its output up to line level.
Does a trigger cable have to be mono?
The 12 Volt trigger In and Out both require a 1/8” (3.5mm) mono cable. These cables should be available at most local electronics stores.
What is an amp trigger wire?
Power trigger cables for connection between e.g. amplifier and subwoofer, or pre- and power amplifier, so the units turn on and off together.
Can I use stereo cable for 12v trigger?
You absolutely can use a stereo cable. Everything is the same except for the division between the ring and the sleeve on the stereo one. You aren’t going to short anything or reverse polarity or literally cause any issues by using a stereo cable. Trigger works now.