How do I change the fog lights on my Audi A4?
Audi A4 B8: How to Replace Fog Lights
- Step 1 – Remove the old fog light bulbs. In order to remove the fog light bulbs, you’ll need to go through the wheel well lining. Turn the wheels so they point away from the fog light bulb you’re changing.
- Step 2 – Install new fog light bulbs. Insert the new bulb to the bulb socket.
What bulb is a 9145?
Many vehicles use an H10 or 9140 or 9145 light bulb in the fog lights, but these bulbs are almost identical to the 9005 bulbs.
What do fog lights look like?
Front fog lights are represented with a green light shining left, with a wavy line through the beam. Meanwhile, the rear fog light symbol depicts an amber light pointing right, with the same wavy line through the beam. Some people think it looks like a sideways jellyfish.
Can I replace halogen fog lights with LED?
Absolutely not. Your foglights will now be totally useless as foglights, and every time they’re on all oncoming traffic will be able to see is your LED foglights in reflector housings.
Is 9145 and 9005 the same?
Many vehicles use an H10 or 9140 or 9145 light bulb in the fog lights, but these bulbs are almost identical to the 9005 bulbs. The 9005 light bulb is 10x more popular than the H10/9145 or 9140 variant so normally a 9005 bulb kit will be used in most cases.
Does the Audi A4 B8 have fog lights?
This article applies to the Audi A4 B8 (2005-2015). Fog lights are important for seeing in poor weather conditions. Most Audi A4’s come with standard white fog lights that are pretty good, but they’re better at making your car look good than helping you drive in low visibility conditions.
What is an Audi A4 light bulb guide?
Our Audi A4 light bulb guides allow you to easily replace light bulbs, replace headlight bulb, change a broken lightbulb, install a hid headlight conversion or install led light bulbs instead of spending countless hours trying to figure out which light bulb sizes in your Audi A4.
How to remove fog light bulbs?
In order to remove the fog light bulbs, you’ll need to go through the wheel well lining. Turn the wheels so they point away from the fog light bulb you’re changing. This will give you more room to work.
How do you adjust fog lights?
Return the socket to the fog light housing and twist it clockwise to lock it into place. Repeat for the other side. Start the car and test the fog lights to make sure that they’re lined up straight. Adjust them if necessary. When you’re finished, put the wheel well liner back into place and tighten down the Torx screws.