How do you program a Trane programmable thermostat?

How do you program a Trane programmable thermostat?

How do you program a Trane programmable thermostat?

Programmed Control Step 1: Hit the “Set Clock/Day/Schedule button that you see on your Trane thermostat. Toggle using the up and down keys until you reach the set schedule option to start programming the many modes on your thermostat. You will have to set up both your Weekday Schedule as well as the Weekend Schedule.

How do you cancel the schedule on a Trane thermostat?

Disable Schedules From the Thermostat:

  1. Press Menu on your XL824/850/1050 thermostat.
  2. Select Schedules & Presets.
  3. Tap the On/Off toggle at the bottom of the screen to enable or disable schedules. You can tap it again to revert. NOTE: The thermostat may take several seconds to apply the change.
  4. Press Home to exit.

How do you calibrate a Trane thermostat?

To Calibrate Indoor Temperature or Humidity

  1. On the thermostat main screen, go to Menu→Settings→Thermostat→Indoor Calibrations.
  2. The Indoor Temp and Humidity settings are used to recalibrate the space temperature or humidity thermostat readings if they are not reading what the actual space temperature or humidity is.

How do I reset my Trane air conditioner?

Steps In Resetting Your Trane AC Thermostat

  1. Switch off the thermostat.
  2. Locate the circuit breaker.
  3. Turn off the air conditioner from the circuit breaker.
  4. Remove the Trane thermostat from the wall.
  5. Wait for a few seconds.
  6. Switch the air conditioner and the thermostat back on.

How do I turn off the permanent hold on my Trane thermostat?

Tap the button that says Run Schedule. Select Permanent Hold. Your thermostat is now in Hold mode. To revert back to your regular schedule, tap Hold and then select Run Schedule….

  1. In the Hold Options menu, use the up and down arrows to select your desired setpoint.
  2. Click Adjust Hold Time.

How do I get my thermostat off hold?

To cancel the temporary adjustment at any time, press CANCEL. Press HOLD to permanently adjust the temperature. The Hold function disables the program and allows you to adjust the thermostat manually, if necessary.

Should I keep my thermostat on hold or run?

By pressing “Hold”, your thermostat will lock in the temperature it’s currently at until you change it again. When you are ready for your normal schedule to resume, simply press the “Run” button and return to your typical programming.