What is ECR on water meter?
The Water Department utilizes an electronic communications register (ECR), which is an outside reading device to conveniently read water meters, without the need to interrupt residents or enter their homes.
What is an SR meter?
Applications: Measurement of cold water where flow is in one direction; in residential, commercial and industrial services. Conformance To Standards: Sensus Sealed Register Water Meters comply with ANSI/AWWA Standard C700, latest revision. Each meter is tested to insure compliance.
What is Rockwell TouchRead?
The TouchRead® Automated Meter Reading System offers water utilities a fast, efficient computerized system for reading meters and producing management reports. It automates the meter reading and billing functions, reduc- ing reading-to-billing turnaround time and billing errors.
How much does a water meter weigh?
Mostly 3/4″ or 5/8″. Some with brass bottoms and some with iron bottoms. I know they weigh about 5 lbs.
What does m3 mean on water meter?
cubic metres
The water meter records how much water you use in cubic metres (m3). One cubic metre equals 1000 litres – that’s enough for either 13 baths, 14 washing machine loads, 28 showers, 33 dishwasher loads or 111 toilet flushes!
How much water does a Rockwell water meter use?
inside of brochure, a shining example of basic economics, Rockwell the water authority. disassemble of a 1957 SR water meter. I have a 4-plex with one 1″ Rockwell water meter. Normally use 5,000-11,000 gallons per month. Last month meter read 54,830 gallons. I measured out 5 gal. bucket takes 60 sec. as a test several times, which is 300 gal/min.
Why choose an ideal water meter?
ideal water meter for submetering, leak detection and low flow monitoring. Our most popular water meter an ideal deduct water meter that pays for itself while you watch your irrigation use. Great for pools and koi pond monitoring. perfect for hostile enviroments or when you have to meter a corrosive water solution. NSF 61 certified
What is the difference between the Rockwell Sr and SR series?
the original SR series used a brass outer measuring chamber, which made the meter much heavier. later in early 1970s Rockwell went to a complete plastic chamber. these meters use magnetically coupled chambers to registers.