How do I activate WPS?

How do I activate WPS?

How do I activate WPS?

  1. On the supplied remote control, press the HOME button.
  2. Select Settings.
  3. Select Network.
  4. Select Network Set up or Setup Network Connections.
  5. Select Wireless, Wireless LAN or Wi-Fi.
  6. Select WPS (Push Button).
  7. Select Start.
  8. While the device is searching, press the WPS button on the router to establish a connection.

What happen when I press the WPS button on my AT Wi-Fi box?

Wi-Fi Protected Setup (WPS) provides a fast, easy way to connect your WPS-enabled devices to your hotspot Wi-Fi network without having to manually enter the password. To utilize the WPS features on your device, press and hold the WPS key. Tap Pair with Main Wi-Fi. Note: WPS is now active on the hotspot for 120 seconds.

Why is my WPS not connecting?

If the WPS connection fails, try the following: Make sure that the router’s WPS feature is enabled. Move the router closer to the device.

How do I connect to WPS-enabled Wi-Fi?

Connecting to a WPS router

  1. Visit the Wi-Fi screen in the Settings app.
  2. Tap the WPS connection button on the router. The button either is labeled WPS or uses the WPS icon, shown here.
  3. On your Android, choose Wi-Fi Preferences.
  4. Choose WPS Push Button or WPS Pin Entry, depending on how the router does its WPS thing.

Should I enable WPS?

On most wireless routers, WPS is enabled by default. The intent is to make it easy for users to set up their network and add all their devices to their Wi-Fi. Therefore, after you set up your network and add the devices you want on your Wi-Fi, if security is a concern, it is a good idea to disable WPS on your router.

How do I reset my AT WPS?

Restart your gateway or modem manually

  1. Unplug the power cord from the back of your gateway or modem. If you have:
  2. Wait 20 seconds.
  3. Put the internal battery back in if you have one.
  4. Plug the power cord back in.
  5. Wait up to 10 minutes for the gateway or modem to restart and your Broadband light to turn solid green.

How do I use the WPS pin on my AT router?

Connect WPS Devices

  1. From your connected device’s web browser, go to http://hotspot.webui. Enter your Login Password, then click Login.
  2. To enable Device PIN WPS setup, from the WebUI enter the PIN from the WPS-enabled device then click Submit.

How do I use the WPS button on my AT router?

Connect a WPS Device

  1. Ensure that the WPS capable device is turned on and functioning properly. From the Advanced Wi-Fi Settings on that device, select WPS Push Button.
  2. On the AT Wireless Internet, press the WPS button.
  3. Wait a few moments for the connection to complete.

How long do you press the WPS button?

Note: You will need to press and hold the WPS button on the wireless router for about 2-3 seconds. After a short period of time, your device and the wireless router will be connected.