How do I change the shape of detail view in Solidworks?
Select the Detail View or detail circle. In the Detail View PropertyManager, set options under Scale, then click OK ….Modifying a Detail View
- Right-click the profile sketch and select Edit Sketch.
- Edit the profile as needed to change the shape or size.
- Click Rebuild to update the detail view.
How do you make a detailed view in Solidworks?
To create a detail view:
- Click Detail View. (Drawing toolbar), or click Insert > Drawing View > Detail.
- The Detail View PropertyManager appears and the Circle tool. is active.
- Sketch a circle.
- When the view is where you want it to be, click to place the view.
What are the three standard views in Solidworks?
The Standard 3 View option under Insert > Drawing View creates three related default orthographic (front, right, left, top, bottom, and back) views of a part or assembly displayed at the same time. The view orientations used are based on the orientations (Front, Right, and Top) in the part or assembly.
What are the different drawing views in Solidworks?
View Types
- View Toolbar.
- Wireframe. Displays all the edges of the model.
- Hidden Lines Visible. Displays the model with all edges that are not visible from the current view angle in gray.
- Hidden Lines Removed.
- Shaded.
- Shaded With Edges.
- Shadows.
- Section Views in Models.
What are the typical standard drawing views?
The most common way to communicate all the information is by using three different views in a multiview drawing: Front view. Top view. Side view.
What are the three standard views we show on our drawings?
Although six different sides can be drawn, usually three views of a drawing give enough information to make a three-dimensional object. These views are known as front view, top view and end view. Other names for these views include plan, elevation and section.
How do you get Trimetric view in Solidworks?
Click Tools > Customize and select or clear Use Large Tooltips to enable or disable the view previews. flyout button in the Orientation dialog box to select axonometric (isometric, dimetric, or trimetric) views and to set which type of axonometric view is displayed when you select a View Selector corner.
Why are all the detail views in SolidWorks rectangle?
All our current detail views are rectangle because they’re created in a viewport which is rectangle. How can I change Solidworks detail view circle to a rectangle?
How do I create a detail view in Revit?
The answer is yes, you can! First create a closed contour sketch where you want the detail view using either an ellipse, spline, or any other sketch geometry. Select the sketch and then select Detail View from the View Layout Tab. You can then choose a style for the Detail Circle: Per Standard, Broken Circle, With leader, No leader, or Connected.
How can I provide feedback about the documentation in SolidWorks?
SOLIDWORKS welcomes your feedback concerning the presentation, accuracy, and thoroughness of the documentation. Use the form below to send your comments and suggestions about this topic directly to our documentation team.
How do I make the detail view default to circles?
You cannot completely make it a system default, but you can half-way make it a default and finish up with manual detail view style changes. Tools > Options > System Options tab > Drawings > Un-check “Display new detail circles as circles”.