What viscosity is dexron VI?
Property
| Property | |
|---|---|
| Brookfield Viscosity @ -40 C, mPa.s, ASTM D2983 | 11500 |
| Color, Visual | Red |
| Flash Point, Cleveland Open Cup, °C, ASTM D92 | 220 (428) |
| Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 | 5.83 |
Is GM dexron VI synthetic?
DESCRIPTION: ACDelco DEXRON-VI ATF is a high performance, synthetic blend formulation that meets or exceeds the stringent requirements of GM’s DEXRON-VI specification and provides warranty protection for current GM vehicles. It also provides improved performance in older GM vehicles, wherever DEXRON is specified.
When did GM go to dexron VI?
High-Performance Synthetic Fluid Protects GM Transmissions The Dexron designation was developed by General Motors, which licenses the brand to LE and other ATF vendors. The Dexron VI classification was introduced for the 2005 model year and newer GM vehicles.
What is the viscosity of DEXRON transmission fluid?
It is concluded that the current used-fluid Dexron viscosity limit of 5.5 cs minimum at 210 F provides a good safety factor for preventing excessive internal leakage at high temperatures.
What is special about dexron VI?
Valvoline DEXRON™-VI ATF is an automatic transmission fluid that can be used in new and old GM transmissions, is fully backward serviceable, and can be used wherever DEXRON™-II and/or DEXRON™-III are recommended. Additional product benefits include: Provides consistent shift performance for new and old GM transmissions.
What transmission fluid does GM use?
DEXRON-VI Automatic Transmission Fluid
DEXRON-VI Automatic Transmission Fluid is suitable for use in vehicles that specify the following requirements: fully licensed and approved by GM, recommended for use in GM transmissions model year 2006 and newer calling for DEXRON-VI Automatic Transmission Fluid (replaces DEXRON-III and DEXRON-II(E), or recommended …
What is special about DEXRON-VI?
Are all DEXRON-VI the same?
Dex VI is licensed by GM so it has to meet their specs no matter the brand. Starting in 06, all GM transmissions were spec’d for Dex VI.
What is the difference between Dexron III and Dexron VI?
The lower, more stable viscosity improved pumping efficiency within the transmission and fluid stability over life. Since Dexron VI is not allowed to thin out (lower its viscosity) as much as Dexron III during use, it requires the use of higher-quality, more shear-stable (less prone to thinning while in use) formulations.
When did GM start using Dexron VI transmission fluid?
A: GM introduced DEXRON-VI in April 2005 as the next generation factory fill transmission fluid for 2006 model-year trucks and cars equipped with Hydra-Matic transmissions.
How do I know if my Dexron fluid is GM approved?
All licensed Dexron fluids must have a license number that begins with the letters B through J. If no license number or “Dexron Approved” logo is found on the container, the fluid may not be GM approved and the fluid cannot be guaranteed to meet GM specifications.
What are the different types of Dexron?
Over the years, the original Dexron (B) was supplanted by Dexron-II (C), Dexron-II (D), Dexron-II (E), Dexron-III (F), Dexron-III (G), Dexron-III (H), Dexron-VI (J), Dexron HP, Dexron LV ATF HP, and Dexron ULV which is the latest fluid.