When was the John Deere 2155 made?
1987-1992
Specifications
| Make: John Deere | Model: 2155 | Years Made: 1987-1992 |
|---|---|---|
| HP-Range: 46 | Engine-Make: JD | Engine-Fuel: DIESEL |
| Engine-Cyl(s)-CID: 3/179 | Transmission-STD: CS | Optional: SM&PS |
| Fwd/Rev Standard: 8/4 | Fwd/Rev Optional: 16 8/8 4 | Mfwd-Std/Opt: OPT |
| Tires-Std Front: 6.50-16 | Tires-Std Rear: 13.6-28 | Wheelbase-Inch: 80.7 |
What horsepower is a John Deere 2155?
55 hp
John Deere 2155
| John Deere 2155 Power | |
|---|---|
| Engine: | 55 hp 41.0 kW |
| CST PTO (claimed): | 45 hp 33.6 kW |
| TSS PTO (claimed): | 46 hp 34.3 kW |
| Drawbar (tested): | 37.4 hp 27.9 kW |
How much oil does a 2155 John Deere hold?
6.3 qts 6.0 L
John Deere 2155 Engine
| Engine Detail | |
|---|---|
| John Deere | |
| Starter volts: | 12 |
| Oil capacity: | 6.3 qts 6.0 L |
| Coolant capacity: | 10.6 qts 10.0 L |
How many horsepower is a John Deere 2150?
John Deere 2150
| John Deere 2150 Power | |
|---|---|
| PTO (claimed): | 45 hp 33.6 kW |
| Drawbar (tested): | 38.11 hp 28.4 kW |
| PTO (tested): | 46.47 hp 34.7 kW |
| power test details … |
How many horsepower is a 2955?
97 hp
John Deere 2955
| John Deere 2955 Power | |
|---|---|
| Engine: | 97 hp 72.3 kW |
| Drawbar (claimed): | 74.2 hp 55.3 kW |
| PTO (claimed): | 85 hp 63.4 kW |
| Drawbar (tested): | 72.99 hp 54.4 kW |
Should I check hydraulic fluid hot or cold?
Check the level of the hydraulic fluid when the tractor is cold. Make sure that the vehicle is on level ground. Lower the boom and buckets cylinders. This isn’t just to make sure that the machine is in a good position, but to keep you safe while checking the reservoir.
How do you check hydraulic fluid on a John Deere?
John Deere Hydraulic System Diagram
- Park the tractor on level ground with implements down.
- Run the engine at approximately 1000 rpm for at least one minute. Stop the engine and wait three minutes for the oil to settle.
- View the oil level in sight glass (A).
- If oil level is below the lower mark, you will need to add oil.
Does tractor need to be running to check hydraulic fluid?
IMPORTANT: Never check the hydraulic fluid level with the tractor running. The engine must be turned off to get an accurate read. View the oil level in sight glass (A). The level should be between the marks on the glass with the optimal level being just beneath the top mark.