What are the codes on a Cal Spa?
Cal Spas Error Codes
| Message | Action Required |
|---|---|
| PRES BTTN TO RSET | Reset by depressing any button located on the top side panel. |
| 102F SNSR BALANCE | Put in a service call. |
| SNSR SYNC with call for service message | Put in a service call. |
| SNSR A with call for service messageSNSR B with call for service message | Put in a service call. |
What does it mean when your hot tub says error?
A hot tub flow error indicates that there is a problem with the flowing of water through the hot tub heater.
What does EC mean on Cal Spa?
Economy
EC: Economy – It will heat to the set temperature and the spa may cool down until the next filtration cycle. Heating will resume again in 12 hours.
What does F2 mean on a Cal Spa?
The Big List of Spa and Hot Tub Error Codes
| CODE | ERROR CODE DESCRIPTION |
|---|---|
| F1, F2 | (Vita Spa) Blown fuse; replace fuse 1 or fuse 2 |
| F2 | 4 hours daily filtration; system message, not an error |
| F4 | 8 hours daily filtration; system message, not an error |
| F6 | 12 hours daily filtration; system message, not an error |
What does PR mean on a Cal Spa?
Using the control panel: Turn the spa on and wait for PR (Priming Mode) to appear on the topside display. Press the JETS button to turn on the pump and let it run for 10 seconds. The pump should be running in low speed.
How do you fix the code on a hot tub?
How to Troubleshoot a Hot Tub FLO Error Code
- Shut down the spa at the breaker.
- Make sure there is no debris in the water that can get sucked into the pump.
- Take out all of the filter(s) and set them aside.
- Turn spa back on at the breaker with the filters out.
What does flow error mean?
A flow error on your hot tub is a sign that there is an issue with your water flowing through your heater in the hot tub. You can identify a flow error as it will display “FLO” on the front panel. Some common issues that can cause a flow error are: Lower than normal water levels. Damaged and/or dirty filter.
Why is my Cal Spa not heating up?
The filter may be dirty or may need to be replaced. A dirty or clogged filter will restrict water flow and shut down the heater. Clean or replace the filter to re-establish water flow.
Why is my hot tub flashing EC?
Ecn or Ec Message The Spa is Operating in the “Economy” (Ecn or Ec) Heating Mode. The Water Temperature is sampled Only during Programmed Filter Cycles. The Heater will only operate and Heat up to Set Temperature during the Filter Cycles.
How do I troubleshoot Cal spa error codes Oh?
Here’s another Cal Spa troubleshooting flowchart for spa error codes OH, including testing the spa heater element for excessive resistance. This type of testing should only be done with the spa heater and all systems powered OFF, and only performed by someone who is qualified to test safely.
Is there a reset button on a Cal spa?
Note that all spas don’t have this feature. Clear any blockages or debris covering the drain or Cal Spa filter, then reset by depressing any button located on the top side panel. Indicates possibility of inadequate water flow to heater to carry heat away from the spa unit’s heating element.
How do I unsubscribe from Cal spas emails?
I can opt out at any time by selecting the unsubscribe option that appears at the bottom of every email. Cal Spas was founded in 1979, and they currently offer more than 250 product models. Each of their hot tubs can be customized from a list of thousands of options, and the company places an emphasis on innovative touches and quality workmanship.
Why is my Cal spa not heating up?
Clear any blockages or debris covering the drain or Cal Spa filter, then reset by depressing any button located on the top side panel. Indicates possibility of inadequate water flow to heater to carry heat away from the spa unit’s heating element.