What are the terminals on a 3-way switch?
A 3-way switch is larger than a single pole switch and has three screw terminals for wiring connections, plus a ground. Two of these take traveler wires that go from one switch to the other. For the third terminal, one switch is connected to the hot supply wire while the other switch is joined to the light.
Do I need a special light switch for a 3-way switch?
The key ingredient is a special type of switch called a “three-way” switch. You’ll need two of them, one to replace the existing switch and another for the new switch location. With these, you’ll have the convenience of turning a light on and off from two spots.
Where does red wire go on 3 way switch?
The black hot wire connects to the far right switch’s common terminal. Red and blue wires link traveler terminals of both switches. The red wire, which is connected to the first switch’s common terminal, leads back to the fixture.
At what terminal of 3 way switch we connect wire going to the load?
common terminal
The common terminal is the “bridge” between the power supply and the load (typically a light fixture). With this in mind, the wire that attaches to the common terminal is either (1) a hot wire from the main board or (2) leads to the load (fixture).
What is the black screw on a three-way switch?
However on each 3-way switch, you have a black screw, this is the special one. On the power coming in from the panel, you would connect that black wire to the one black screw. And on the other switch, you would connect the black wire coming from the light to that black screw.
What is the difference between a 2 way and 3 way light switch?
What is the difference between a 2 way switch and a 3 way switch? A two-way switch turns lights on or off from one location only. Light can be turned on or off from 2 locations with a three-way switch.
What is the black screw on a 3-way light switch?
This screw serves one of two purposes depending on where it is positioned in the circuit run: Either it accepts the incoming black (hot) wire from the power source, or it connects to the black (hot) wire that leads onward to the light fixture.