How do you reset the Immobiliser on a Land Rover Defender?
Simply take old battery out, replace, close immobilser and activate lock and unlock a few times. Do this within 5 minutes. Just done mine without any hassles.
How do I enter EKA code on defender?
To enter the EKA code, turn the key to II and back to 0 the same amount of times as the first number, e.g., if your EKA code is 4321, turn the key 4 times. 6. Now open and close the door to confirm the entry.
How do I reset my Land Rover security system?
To reset the alarm on the 2000 Land Rover Discovery, turn Your car off and make sure the front drivers side door is easily accessible. Then unlock the car and put the key into the ignition. Leave it there for at least a minute and then, set it to the RUN position. Restart the car to see if Your alarm has been reset.
What is a EKA code?
Emergency Key Access Code. The EKA code is found on the security information card supplied with your vehicle. The code is 4 digits long. The EKA code IS NOT the code in the key fob.
How do I permanently disable anti theft system?
Insert the key into the ignition and turn it to the on position, which activates your accessories but not the engine. Leave the key in position for about 10 – 15 minutes. Step 3: Check the anti-theft light again. If it’s no longer blinking, turn the key back to the Off position and allow it to set for a minute or two.
Where is the EKA code on a Land Rover?
Land Rover EKA Code (emergency key access) code
- The EKA code is found on the security information card supplied with your vehicle.
- The code is 4 digits long.
- The EKA code IS NOT the code in the key fob.
- The grey plastic tag on the keys IS NOT the EKA code, it is the ignition key code.
Where do I find my EKA code?
The EKA code is found on the security information card supplied with your vehicle. The code is 4 digits long. The EKA code IS NOT the code in the key fob. The grey plastic tag on the keys IS NOT the EKA code, it is the ignition key code.