How do you reset the security light on a 2001 Chevy Impala?
Open the trunk or any door of the Impala. Switch the lock to the “lock” position. Remove the key from the ignition. The light on the radio display will flash quickly; this signals that the system is resetting.
How do I turn off the security light in my Chevy?
Insert the ignition key, put it in the on position, attempt to start the engine. With the key in that position, wait ten minutes. The security light will blink and go out. Turn the key off, and wait five seconds.
How do you turn off the security light on a 2002 Chevy Impala?
To reset the alarm all You will need to do is put the key in the ignition of Your car and then let it sit there until the security light on the dash is flashing instead of being on solidly. When that happens You can go ahead and try to crank over the engine and see if it will start.
How do you program a 2001 Chevy Impala key?
2001 Chevrolet Impala Key Fob Remote Programming Instructions
- Insert key into the ignition and turn it to the On or ACC position, turn off radio. (
- Press and hold DISP button on radio until settings is displayed.
- Press Seek until FOB PROG is displayed .
- Press Prev or Next and BEGIN will be displayed.
How do you clear codes on a Chevy Impala?
Select “Reset” or “Clear” on your scan tool (depending on the manufacturer and model of your scan tool, both phrase variations will affect the button). It will clear the computer’s codes. Allow your Impala’s computer to reset itself by starting it up and driving at a normal highway speed for 30 minutes.
How do I reset my security system?
You can reset your alarm system by powering it down and then powering it back on. This is what is known as a power reset. To power down the system, the backup battery must be disconnected, and the transformer must be unplugged. Then reconnect the battery and transformer to power it back on.
Why is my Chevy Impala not starting?
The most common reasons a Chevrolet Impala won’t start are a dead battery, an alternator problem, or failed starter.
How do you turn off the security system on a 2003 Chevy Impala?
You’ll need to reset the anti theft system in order to get Your security warning light to shut off on Your dashboard. This will be done by putting the key in the ignition and putting the vehicle in to the on position and then turning it off.