What is an amp pass-through?
An amp with an in and through or monitor as it’s sometimes called can pass the input to the amp on to another amp or Squeezebox for example if you wanted to also stream sound around the house. You can have two amps for whatever reason you might want, whether another headphone amp or speaker amp.
What Is REM on a Rockford Fosgate amp?
REM Terminal – This spade terminal is used to remotely turn-on and turn-off the amplifier when +12V DC is applied. Remote. Punch. Bass.
How do you hook up a sub and amp?
How to Connect A Car Subwoofer to An Amplifier
- Lay the Power Cables.
- Find a Good Metal Ground.
- Plug RCA Plugs Into Subwoofer Output On Receiver.
- Use Speaker Wires To Connect The Subwoofers To The Amplifier.
- Connect the Power Cable to Battery.
Where does the remote wire go from the amp?
The turn-on wire (also called the remote wire) is located behind the stereo. On aftermarket stereos, it’s usually a blue and white wire. The remote wire will “tell” your amplifier to turn on whenever the stereo is powered up (usually, whenever the vehicle is turned on).
Does the remote wire have to be connected?
The remote turn on wire must be connected to part of the vehicle’s electrical system that only turns on when the ignition is in the ACCESSORY or ON position.
What is the Rockford Fosgate p1000-1bd?
With its super efficient Class-BD circuit topology and 1,000 watts RMS power, the Rockford Fosgate P1000-1bd assures maximum BOOM for your buck! Due to its dedicated low frequency response, this amplifier is optimized for mid-bass car speakers or subwoofers only.
Why choose Rockford Fosgate amps?
Rockford Fosgate amps use custom TO-247 MOSFETs. These have 60% more metal tab area for more power capacity, lower impedance and improved heat dissipation over traditional TO-220 MOSFETs found in competitor amps. Max. Current Draw (13.8V Sinewave)
What is the best Rockford Fosgate punch subwoofer?
The P3D4-12 is the best performing Rockford Fosgate Punch series subwoofer for cars and trucks. The P3 12” features Dual 4-Ohm voice coils, 600 Watts RMS of power handling, and accommodates a grille insert using the included cast aluminum trim ring. Click to explore some of the products that work best.
Is the Rockford t10001bd a good amplifier?
Rockford Fosgate amplifiers have always been conservatively rated, and the T10001bd is certainly no exception. Rated at 1000 watts RMS, the T10001bd is a solid choice for a pair of 4-ohm DVC subwoofers or four 4-ohm SVC subwoofers.