What sizes do corral panels come in?
Normally, round tube panels are constructed of quality steel pipes in diameter from 1″ to 2-1/4″, square tube panels are available in size from 3/4″ × 3/4″ to 2″ × 2″ pipe while oval tube is in size of 30 × 60mm or 40 × 80mm. Custom sizes can be also supplied as your request.
How long are corral panels?
Corral Panel, 6-Bar, Heavy-Duty, 16 ft.
What are corral panels used for?
Corral Panels For Sale In California
- The Corral Panel is designed with the security of your livestock.
- Corral panel is designed with horse and rider safety and is ideal for round pen work, exercise, lessons and training.
- The Corral Panel is specifically designed for portability.
How many corral panels do you need to make a round pen?
Round Pen Calculator
DESIRED DIAMETER | 10′ CORRAL PANEL | 16′ CORRAL PANEL |
---|---|---|
50 | 16 | 10 |
55 | 17 | 11 |
60 | 19 | 12 |
65 | 20 | 13 |
How do you secure a corral panel?
Stand the panels upright and connect them using the panel pins. Corral panels are made for ease of use, and standing them up and lining up the pins is easy enough for one person to do alone. Once the pins are in place, take the additional precaution of using bailing wire to secure the pins in place.
How do you attach plywood to corral panels?
Drill holes in the top and bottom corners of the plywood and in the center. Then run wire through these holes, and use the wire to attach the plywood securely to the corral panels.
How many 10 foot panels do I need for a 60 foot round pen?
Example: If you plan to use 10 foot panels to construct a 60 foot pen, multiply 60 by 3.14 to get a circumference of 188.4, then divide 188.4 by 10 (panel length) to get 18.84. So you will need 19 panels for a slightly larger than 60-foot pen.
What is a corral panel?
These corral panels are designed for containment in crowding areas such as feedlots and working pens. Ideal for light confinement, but strong. These corral panels are ideal for overnight shows and trail rides.
Does Agri supply sell Corral panels?
Corral Panels Agri Supply stocks a wide selection of Corral Panels sturdy enough to handle any fencing requirement – from 10 to 16-foot galvanized horse panels to heavy duty 4-gauge wire panels for hogs and other livestock. Agri Supply has every type of panel to keep your animals safe and secure, including walk-thru gates.
What are the travel N Corral panels made of?
The lightweight Travel N Corral panels will allow you to build a 13’ x 13’ round horse stall right next to your trailer in less than 15 minutes. Panels are 7.0’ long and 4.0’ high. All joints are welded for strength. Panels interlock at every joint with a 4.0’ long rods. Panels are built from 1″ galavanized round steel tubing for durability.
Why choose RCI for your Corral panels?
RCI has been handcrafting custom corral panels in California since 2001 and is California’s most established corral builder. Because RCI exclusively uses Allied Gatorshield tubing with a 55KSI tensile strength rating, most of our original work remains in after years of use.