How do I restart APC UPS?
APC Smart UPS – How to reset / restart
- Turn off and unplug UPS from wall.
- Press and hold the OFF button again.
- You may see a quick flash of the LED’s and you should hear an audible “”click”” from the UPS.
- Turn UPS back on.
What is the default login for APC UPS?
The default user name is device, and the default password is apc.
What is Cold Start function in UPS?
A cold start is when you start a UPS without input power. This is useful if you need to test if the UPS is not turning on due to bad input power or if you need to turn the UPS on to operate during a power outage/failure.
Why won’t my UPS turn on?
Be sure the line cord is connected. Be sure each circuit breaker is in the On position, or replace the fuse if needed. If this occurs repeatedly, contact an authorized service provider. Check the UPS LEDs to be sure a battery or site wiring problem has not occurred.
Why is my APC Back UPS beeping?
The Back-UPS ES is about to shut off due to a low battery charge condition! When the unit beeps once every second, the battery has about 2 minutes of power remaining. Immediately power down your computer and turn the unit OFF. When normal power returns, the unit will recharge the battery.
How do I log into apc?
APC: First-time login to an APC device
- Configure your PC using a static IP address on the 192.168.
- Open a web browser and enter the default IP address of the AP device—192.168.2.66:
- Once the login page is loaded, enter the default administrator login information (login: admin; password: admin01) and click Login:
How do I reset my apc password?
Press the Reset button a second time immediately while the LED is flashing to reset the user name and password to their defaults temporarily. Then press ENTER as many times as necessary to redisplay the User Name prompt, then use the default, apc, for the user name and password.
What is inverter cold start?
Cold Start Functionality restores emergency power to the load after the installation of a new battery. Please contact our Tech Support department with installation, troubleshooting, or general product questions.
Why choose APC Smart-UPS SC?
APC Smart-UPS SC is ideal for small and medium businesses looking to protect networking equipment and point-of-sale (POS) devices from power disturbances and outages Intelligent and efficient network power protection from entry level to scalable runtime.
When does the ups restart in online operation?
When adequate power is restored to the UPS (and is within the operating voltage range of the UPS) it will restart in online operation. This is independent of PowerChute software being installed or not.
What kind of ups do I need for my business?
Capacity Used” High-efficiency 3-phase UPS that features advanced product features, competitive specifications, and robust electrical design, making business continuity easy in the data center or electrical room. This is an exceptionally easy to install, operate, maintain, and service 30 kVA UPS, ideal for small and medium businesses.
What is Smart-UPS SC?
APC Smart-UPS SC is ideal for small and medium businesses looking to protect networking equipment and point-of-sale (POS) devices from power disturbances and outages Intelligent and efficient network power protection from entry level to scalable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other