How do you reset the security on a 2012 Chevy Malibu?
Put the key in the ignition, turn to the “run” position (don’t even try to crank it). Leave it on for about 15 minutes. Turn they key off and remove it from the tumbler. Repeat this procedure three times, the last time untill the THEFT light goes out.
How do you turn off the security light on a Chevy Malibu?
To reset the security system in a chevy malibu use the fob to unlock the door then with the door open hit the lock button and wait until the security light stops flashing, then press the unlock button on the fob again.
How do you turn off anti-theft on a 2012 Chevy Malibu?
Reach in through the window and turn the key to ‘half I’m (as opposed to full on). Then leave it sit for 10 minutes until the anti theft light stops blinking. Then reach in through the window, take the key out fully, then re insert key and start car while standing outside.
How do I get my anti-theft light to go off?
If the car’s anti-theft light is not blinking, allow the system to reset itself. The resetting is done by turning the key to the off position and resting there for some minutes. Try to start the engine to see if it is working. If it’s not working, check the functioning of the battery.
What does a car with a lock symbol mean Chevy Malibu?
The car and lock symbol is the Chevy Malibu immobilizer warning light. This light should come on briefly when the engine is started, then go out. If the immobilizer light stays on, it means there’s a problem with arming or disarming the theft-deterrent system.
How do you reset the security on a 2011 Chevy Malibu?
The security system in a 2011 Chevrolet Malibu can be reset by turning the car to the on position without starting it. Now You will need to wait 20 minutes until the light becomes solid and then restart Your engine. An anti-theft device makes it more difficult for thieves to drive Your car.
How do I reset my Chevy anti-theft system?
How Do I Reset Anti-theft System: Chevy Silverado?
- Insert ignition key.
- Turn it to the on position.
- Attempt to start the engine.
- Leave the key in that position until the security light stops flashing.
- Once the light goes off, switch the ignition key to off.
- Wait about five seconds.
- Try to start the engine again.
What does the car and lock symbol mean?
The lock and car symbol and warning light you are seeing is saying that the anti-theft system has been activated. Your owner’s manual should give more information on how to reset this light. This may also be what is causing the parasitic draw on the battery.